This is the authors' abstract. We don't add key points for this paper.
This study investigated the effects of C 2 H 4 plasma treatment on a Cu surface and its influence on the quality of Cu–to–Cu bonding. C 2 H 4 plasma is applied to enhance Cu bonding by producing reactive hydrogen for effective oxide removal and activation, while forming a protective carbon layer at lower temperatures with simpler processing than forming gas. An 8-inch Si wafer with a 700 nm thick SiO 2 layer was used as the substrate, onto which 50 nm Ti and 1 μm Cu layers were deposited by DC magnetron sputtering. The Cu surface was treated with C 2 H 4 plasma for varying durations (10 ∼ 90 s) to modify its surface characteristics. XPS (x-ray photoelectron spectroscopy) analysis showed that plasma treatment reduced the surface oxides and contaminants, with a noticeable increase in Cu 2 O. AFM (atomic force microscopy) measurements indicated that the plasma treatment decreased the surface roughness by over 40%, with the roughness decreasing as the plasma-treatment time increased. Cu-to-Cu bonding was performed at 260 °C, followed by annealing at 200 °C. A bonding quality was assessed using SAT (scanning acoustic tomography), FE-SEM (field emission scanning electron microscopy), and TEM (transmission electron microscopy), revealing that the plasma-treated sample exhibited fewer voids and a diffused Cu interface, suggesting improved bonding compared to the non-plasma-treated sample. The results indicate that C 2 H 4 plasma treatment enhances the Cu surface, leading to improved Cu-to-Cu bonding quality.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: