Answers are grounded in this paper and cite their sources.
The electrochemical oxidation of ethanol and methanol in a liquid‐feed solid polymer electrolyte fuel cell operating at 145 ° C was investigated. A composite membrane made of Nafion ionomer and silica was fabricated in order to maintain the advantageous water‐ retention properties of these materials at high temperature. A pressurized cell ( 4 atm , anode ; 5.5 atm , cathode ) employing carbon‐ supported Pt ‐ Ru ( 1 : 1 ) and Pt catalysts with a Pt loading of 2 mg cm − 2 was investigated. The direct methanol fuel cell showed a peak power density of about 240 mW cm − 2 at 0.6 A cm − 2 and 0.4 V . The power density approached 450 mW cm − 2 in the innternal resistance‐free polarization curve, and the methanol crossover rate was about 4 × 10 − 6 mol min − 1 cm − 2 . The direct ethanol fuel cell showed a maximum power density of about 110 mW cm − 2 at 0.32 V and 0.35 A cm − 2 with high selectivity toward CO 2 formation (≈95%).
No takes yet. Share an insight, caveat, or question.
A.S. Aricò (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: