Answers are grounded in this paper and cite their sources.
Using alkoxides of Y and Ba and Cu-acetate as raw materials, Y Ba 2 Cu 3 O 7- x (YBCO) superconductive films were produced through the sol-gel method. When the nonaqueous mixed solution was hydrolyzed under an appropriate condition, a pure and homogeneous YBCO powder could be prepared. Controlling the metal concentration and the temperature of the sol, precursor(gel) films were formed on YSZ substrate by dip-coating. And heating the films in the range of 200°-950°C, changes of the films morphologies, the generated phases and the film reactions with the substrates were studied using scanning electron microscopy and X-ray diffraction. It has been known that to improve the superconductivity of the film it is necessary to sinter it at as high as 950°C and increase its thickness over about 3 µm after sintering. A superconductive film with T c.off =75 K was obtained by adopting these conditions.
No takes yet. Share an insight, caveat, or question.
Masuda et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: