Answers are grounded in this paper and cite their sources.
To promote heat dissipation in power electronics, we investigated the thermal conduction performance of Sn-Bi solder paste between two Cu plates. We measured the thermal resistance of Sn-Bi solder paste used as thermal interface material (TIM) by laser flash technique, and a thermal resistance less than 5 mm2 K/W was achieved for the Sn-Bi TIM. The Sn-Bi solder also showed a good reliability in terms of thermal resistance after thermal cycling, indicating that it can be a promising candidate for the TIM used for power electronics applications. In addition, we estimated the contact thermal resistance at the interface between the Sn-Bi solder and the Cu plate with the assistance of scanning acoustic microscopy. The experimental data showed that Sn-Bi solder paste could be a promising adhesive material used to attach power modules especially with a large size on the heat sink.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: