Answers are grounded in this paper and cite their sources.
The rapid expansion of energy storage demands across diverse applications has intensified the search for alternative battery chemistries beyond lithium-ion systems, as no single technology can simultaneously optimize all performance metrics. This need is further amplified by geopolitical and supply-chain vulnerabilities stemming from the uneven distribution of lithium resources, motivating interest in systems that employ more earth-abundant charge carriers. Rechargeable magnesium metal batteries (RMBs) have emerged as a promising candidate due to their reliance on widely available, low-cost magnesium, the high theoretical volumetric capacity afforded by the divalency of Mg²+, and intrinsic safety advantages including reduced dendritic propensity and lower air sensitivity [1]. However, their practical advancement remains constrained by the scarcity of compatible electrolytes, primarily due to the formation of Mg-ion-insulating surface films that fail to function as stable solid-electrolyte interphases, thereby impeding reversible Mg plating and stripping [2]. Here, guided by considerations of Mg²+ binding affinity and steric hindrance, we report a single-solvent electrolyte system based on the commercially available aminoacetaldehyde dimethyl acetal (ADMA). This system forms a Mg-ion-conducting interphase that enables efficient and stable Mg cycling while suppressing corrosive reactions. As a result, it achieves an average Coulombic efficiency of 97.3% over 500 hours in Mg‖stainless steel cells at 0.5 mA cm−2 and 0.5 mAh cm−2, and delivers capacity retentions of 90.3% and 99.2% after 250 and 300 cycles in Mg‖Mo6S8 and Mg‖Te full-cells, respectively. These findings demonstrate that high-performance, practically viable RMBs can be realized through rational solvation-structure engineering using readily accessible commercial solvents and salts. We employed various analytical techniques for physicochemical and electrochemical characterization during the experiments. Surface morphology and elemental analysis were performed using SEM-EDS (JSM-7800F Prime microscope, JEOL, Japan) equipped with a Silicon Drift Detector (SDD, 80 mm2 active area). ToF-SIMS analysis was conducted using a ToF.SIMS-5 instrument (ION-TOF, Germany) with a 30 keV Bi+ primary beam and a 0.5 keV Cs+ beam for depth profiling (400×400 µm2 grid size). Raman spectroscopy was carried out using a LabRAM HR Evolution spectrometer (HORIBA, Japan), employing a 633 nm helium neon laser source over a range of 700 to 800 cm−1. XPS measurements were conducted by employing an AXIS-His instrument (KRATOS, U.K.) under Ar conditions. EIS measurements were conducted after 1 cycle (0.1 mA cm−2 − 0.5 mAh cm−2), using a potentiostat (VSP, Bio-Logic, France) over a frequency range from 1.000 MHz to 0.500 mHz. Through systematic comparative analyses, we demonstrate that strategic molecular-level electrolyte design can overcome the inherent limitations of single-solvent systems in RMBs, representing a significant step toward low-cost, scalable magnesium batteries with competitive electrochemical performance [3].
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: