Answers are grounded in this paper and cite their sources.
In order to improve the selectivity and the stability and the stability for gas permeation of poly (1‐trimethylsilyl‐1‐propyne) (PTMSP) membrane, it was chemically modified by grafting polydimethylsiloxane (PDMS) chains. The graft copolymers were synthesized by four different methods via metallation of PTMSP with n ‐butyllithium. PDMS content of the graft co‐polymers was controlled in the range of 4–92 mol %. Very tough, thin membranes could be prepared from these graft copolymers using a solvent casting method. Thermal property and gas permeability of the copolymer membranes thus obtained were evaluated. These membranes were relatively thermally stable, and the softening points were over about 150°C. Oxygen permeability coefficients Po 2 and selectivity Po 2 /PN 2 of PTMSP/PDMS graft copolymers depended on the PDMS content, the former was in the range of 1 X 10 −8 to 2 × 10 −7 cm 3 (STP)· cm/(cm 2 · s · cm. Hg) and the latter was 2.0–3.1. Minimum values of PO 2 and PN 2 occured at PDMS content of about 55 mol %. The introduction of more than 60 mol % of PDMS resulted in oxygen permeability coefficient which was maintained for more than one moth (PO 2 = 2 − 6 × 10 −8 cm 3 (STP)· cm/(cm 2 ·s·cm Hg), PO 2 /PN 2 = 2.3–2.7).
No takes yet. Share an insight, caveat, or question.
Nagase et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: