Answers are grounded in this paper and cite their sources.
Elastocaloric cooling has recently shown high potential as an environmentally friendly alternative to vapor-compression technology. Here, we have studied and analyzed the geometric characteristics of two active elastocaloric regenerators (AeCRs) that were proved to have high application potential, i.e., a shell-and-tube AeCR loaded in compression and a parallel-plate AeCR loaded in tension, with the goal of maximizing their cooling performance. For this purpose, a previously developed and experimentally verified 1D numerical model was used. We focused only on the geometries and operating conditions that allow for durable, i.e., buckling-free operation in compression and fatigue-resistant operation in tension. The results show that although the applied strain of the parallel-plate AeCR loaded in tension needs to be limited (below 2%) to ensure fatigue-resistant operation, it outperforms (in terms of cooling power and COP at 15 K of temperature span) the shell-and-tube AeCR, which due to buckling issues suffers from a poorer heat-transfer geometry, but can withstand higher strains due to compressive loading. At the maximum strain of 2%, the optimum parallel-plate AeCR can generate a maximum cooling power of 1825 W (corresponding to 7075 W kg−1 of elastocaloric material) and a COP of 9.15 at a zero-temperature span. On the other hand, due to a higher applied strain (3%) the optimum shell-and-tube AeCR can generate a higher maximum temperature span at zero cooling power (up to 50 K) but has limited cooling performance at lower temperature spans. In addition, the layering of the shell-and-tube AeCR was investigated for the first time to improve its performance. This study shows the crucial impact of the heat-transfer geometry (heat-transfer area and hydraulic diameter), which needs to be further improved in compression-loaded AeCRs to improve their efficiencies (without compromising the buckling stability). The study also shows the importance of the applied strain, which needs to be at least 2% or more to achieve a high cooling performance of the AeCR. The obtained results should serve as guidelines for designing powerful and efficient AeCRs in the future.
No takes yet. Share an insight, caveat, or question.
Ahčin et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: