Performance characterization of cellulose acetate and poly(vinylpyrrolidone) blend membranes

Hydrophilic ultrafiltration membranes have been prepared by blending cellulose acetate (CA) as a matrix polymer with increasing concentrations of poly(vinylpyrrolidone) (PVP) using N,N′ ‐dimethylformamide as the solvent. It is observed that the presence of PVP beyond 50 wt % in the casting solution did not form membranes. Prepared membranes have been subjected to ultrafiltration characterizations such as compaction, pure water flux, water content, and membrane hydraulic resistance. The results indicate significant changes in the characteristics upon the addition of PVP, which may lead to improved performance. The porosity, pore size, and molecular weight cut‐off of the membranes also increase as the concentration of PVP increases. It is estimated that the pore radius of the CA/PVP membranes increases from 30 to 63 Å, when the concentration of PVP increased from 0 to 50 wt %. This is in agreement with the results obtained from scanning electron microscopic studies.