Answers are grounded in this paper and cite their sources.
This paper presents an account of an experimental study of the pure-bending and recovery properties of both continuous-filament and spun yarns. The bending behaviour of yarns is approximately represented by a simple two-element rheological model of an elastic element and a single frictional element acting in parallel. The use of this model allows the bending deformation to be separated into an elastic and a frictional component, measured by the flexural rigidity and the frictional (or coercive) bending moment, respectively. An expression for the frictional couple in yarn-bending is derived from consideration of the lateral forces acting within the yarn and the degree of set of fibres in a twisted yarn. Bending experiments were made with nylon model plied yarns, conventional multifilament yarns, and staple-fibre yarns; it is shown that the level of residual fibre tension within both unset and set yarns can be estimated from the experimental values of the frictional bending moment by semi-empirical means. The mechanisms of bending for conventional polyester-fibre multifilament and worsted-spun yarns are investigated and the effects of yarn linear density, twist, and yarn-setting treatment studied. The bending behaviour of a series of wool-nylon blended-fibre yarns is also discussed in terms of the simple two-element rheological model of yarn-bending behaviour. It is shown that both the flexural rigidity and the frictional bending moment for the blended-fibre yarns can be calculated by assuming independent behaviour of the fibre during bending.
No takes yet. Share an insight, caveat, or question.
Dhingra et al. (1976) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: