Answers are grounded in this paper and cite their sources.
This paper proposes a novel circulating-current control strategy applied in back-to-back parallel three-phase converters with individual dc links for permanent magnet synchronous motor (PMSM) drives. First, the zero-sequence circulating current and the cross current paths in the whole parallel system are analyzed. Then, the models of an n-paralleled subsystem with individual dc links in both the three-phase stationary coordinates and the synchronous rotating coordinates are built up, which explores the fundamental mechanism of circulating current. Based on the analysis, a novel control strategy can suppress the circulating current at the motor side. The control system consists of two main loops in the d-axis, q-axis, and zero-axis, which are defined in this paper as sum control and difference control. The proposed control strategy effectively suppresses the circulating current in both steady-state and transient operations. The zero-sequence circulating current is greatly reduced by the difference control on the zero-axis. In addition, the bandwidth of the controllers is greatly improved, especially when the current-sharing inductance is much smaller than the stator inductance. Finally, with a PMSM load, the simulation and experiment results are presented to verify the theoretical analysis and proposed control strategy.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: