Answers are grounded in this paper and cite their sources.
In this study, we show a simple two-step surface engineering method that uses chemical oxidation (using KOH and NaClO in 1:2 M ratio)-assisted leaching of metals (Cr, Mn, and Ni) from the surface and an electrochemical potentiostatic activation enabled resurfacing of only catalytically active Ni and Mn of the alloy. Such surface-engineered stainless steel 304 (SS-304-Ox-ECA) foils rich in Ni(OH) 2 and multivalent Mn oxides were found to have a coarse texture with uniform nanostructures. As a result of leached Cr, resurfaced catalytically active sites improved roughness with nanotexturing and enhanced the charge-transfer ability. The SS-304-Ox-ECA foil has become a high-performance HER electrocatalyst that delivered 400 mA cm –2 higher current density at −0.8 V versus RHE and demanded 210 mV lower overpotential for a current density of 100 mA cm –2 than pristine SS-304 foils in 1.0 M KOH. A smaller Tafel slope (90 mV dec –1 ) and a higher double-layer capacitance (2 C dl = 0.784 μF cm –2 ) further justified that the activity enhancement is also due to the improved HER kinetics and increased electrochemical surface area. This catalytic electrode of high abundance and low cost is a promising candidate for cost-efficient hydrogen production from water.
No takes yet. Share an insight, caveat, or question.
Anantharaj et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: