This is the authors' abstract. We don't add key points for this paper.
Thin-film transistors (TFTs) based on amorphous indium gallium zinc oxide (a-IGZO) were fabricated by radio-frequency magnetron sputtering on glass substrates. The TFT device structure was a bottom-gate type, consisting of indium zinc oxide and as electrodes (gate, source, and drain) and gate dielectric, respectively. The resistivity of the a-IGZO channel layer was . TFTs with a gate length and gate width displayed a saturation mobility of , a threshold voltage of 0.44 V, a drain current on–off ratio of , and subthreshold gate-voltage swing of . After 1000 h aging time at room temperature, the saturation mobility remained almost constant while the threshold voltage shift was as small as 460 mV. The IGZO TFTs based on gate dielectrics sputtered near room temperature were found to be good candidates for applications on organic flexible substrates.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: