This is the authors' abstract. We don't add key points for this paper.
InGaAs-GaAs separate confinement, heterostructure single quantum-well (SCH-SQW) lasers (/spl lambda/=0.98 /spl mu/m) with lattice-matched InGaP cladding layers, using a new Ga/sub 2/O/sub 3/ low reflectivity (LR) front-facet coating, are reported. The CW peak power density (17 MW/cm/sup 2/) of 6 /spl mu/m/spl times/750 /spl mu/m ridge-waveguide lasers is limited by thermal rollover, and repeated cycling beyond thermal rollover produced no change in operating characteristics. The high-power temperature distribution along the active stripe has been measured by high-resolution infrared (3-5 /spl mu/m) imaging microscopy. The temperature profile acquired for a very high optical power density P/sub D/=11 MW/cm/sup 3/ was found to be uniform along the inner active laser stripe, and revealed a local temperature increase at the LR front facet /spl Delta/T/sub f/ of only 9 K above the average stripe temperature /spl Delta/T/sub s/=24 K. An excellent front-facet interface recombination velocity>
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Passlack et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: