Answers are grounded in this paper and cite their sources.
We developed a novel nondestructive and contactless method for measurements of critical current density (J/sub c/) in high-temperature superconductor (HTS) thin films by using a permanent magnet (Sm/sub 2/Co/sub 17/). This measurement technique is based on a repulsive force (F/sub r/) and attractive force (F/sub a/) between the magnet and HTS film caused by the shielding currents and pinning forces. The F/sub r/ and F/sub a/ were measured by using a high-resolution load sensor changing the distance (L) between the magnet and HTS film. An effective maximum repulsive force (F/sub m,eff/) could be determined from an extrapolated value of the F/sub r/ vs. L curve for L=0 mm. We investigated the relationship of the J/sub c/ to the F/sub m,eff/ in many HTS (YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// and ErBa/sub 2/Cu/sub 3/O/sub 7-/spl delta//) samples. The standard J/sub c/ of HTS films was measured by using an inductive measurement system produced from THEVA GmbH. We found that the J/sub c/ is almost proportional to the two-thirds power of the F/sub m,eff/ normalized by the film thickness. This result indicates that the simple permanent magnet technique can be easily estimate the J/sub c/ of the HTS films. This system has good reproducibility for the J/sub c/ measurements and is useful to provide a rapid, routine characterization of the superconductivity in the HTS materials.
No takes yet. Share an insight, caveat, or question.
Ohshima et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: