Numerical analysis of hysteresis loss in VIPER cables for HTS fusion applications

This is the authors' abstract. We don't add key points for this paper.

Twisted, stacked cable-in-conduit-conductors, including VIPER cables, have emerged as a popular choice for high temperature superconductor fusion applications. The time-varying magnetic fields these cables are exposed to can generate significant AC losses, which are important to quantify for the design of fusion magnets. Although AC loss in twisted tapes and stacks—including VIPER cables—has been the subject of increasing research, many studies focus on higher temperatures and low fields outside the range applicable to fusion, while those considering higher fields tend to provide a less detailed analysis of the loss. This work provides a fundamental examination of the hysteresis loss characteristics of VIPER tapes, stacks and cables under conditions relevant to fusion applications. 3D finite element method models implemented with H-φ formulation are used to simulate the loss at 20, 40 and 77 K, under applied magnetic fields of up to 20 T. Cables with up to 10 tapes per stack are considered. The field-angle dependence of critical current and n -value are accounted for, based on measured data from 4 mm Faraday Factory tape. Results show that hysteresis loss in VIPER strands is independent of pitch length and winding radius, a valuable result for shortening simulation time. A semi-empirical method is proposed to estimate the loss in VIPER cables from 2D simulations of flat stacks, supplementing the established 2 / π relationship. It is also shown that hysteresis loss in VIPER geometries can be scaled across temperatures by normalizing with the self-field critical current of a single tape, surprisingly irrespective of cable I c .