Answers are grounded in this paper and cite their sources.
A toroidal plasma column, produced and confined by a rapidly rising helical magnetic field is studied. This `screw pinch' is of interest because it is in equilibrium and is completely reproducible. The discharge vessel is a quartz torus with major and minor diameters of 72 and 12 cm. Plasma currents (axial j z and azimuthal j θ ) are induced by two orthogonal primary coils, which are simultaneously connected to capacitor banks ( E z = 5 kJ and E θ = 7.5 kJ). Both circuits have a ringing frequency of 70 kHz. During the first microsecond the plasma collapses; then the column drifts about 0.5 cm to the outer wall and remains in this position, slightly off the tube axis, until the end of the first half cycle. The plasma is kept in this equilibrium position by the compression of the B θ -field between the plasma column and the metal shell surrounding the torus. The necessary gaps in the shell are constructed with special care. During the 7 μsec of the first half period no instabilities have been observed. This stable behaviour is found even if the pitch of the magnetic field is varied between wide limits; expressed in terms of the axial current, a variation between approximately 4-12 times the Kruskal limiting current did not impair the reproducibility. A large-amplitude oscillation, excited by the implosion, is observed. The frequency agrees with the frequency of the stable m = 0, k = 0 mode, predicted by the normal mode analysis. From measured Stark broadening a density of 2 × 10 16 cm -3 has been derived, which corresponds to a compression ratio (radius of the tube divided by plasma radius) of 3. In a 15 μ Hg helium discharge a temperature of 20 eV has been measured.
No takes yet. Share an insight, caveat, or question.
Bobeldijk et al. (1967) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: