Investigation into arc constriction by active fluxes for tungsten inert gas welding

Mechanisms by which active fluxes increase the penetration of conventional tungsten inert gas (TIG) welds (so called A-TIG welds) are reviewed. The most dominant mechanism for increased penetration is considered to be arc constriction rather than a change in the surface tension of the molten pool. An experimental programme of work was carried out using A-TIG flux in combination with a number of welding processes. The plasma process was investigated as it gives greater penetration than conventional TIG welding by increasing current density. The CO 2 laser and electron beam processes which do not rely on a current carrying arc as the heat source for welding were also investigated. Macrosections taken from the welds made by these processes showed that the A-TIG flux was only effective when the weld pool was produced by an arc or plasma. Where there was no arc or plasma present, the flux had little effect.