Answers are grounded in this paper and cite their sources.
The combination of coagulation/flocculation and discfiltration with ozonation to reduce nutrients and organic micro-pollutants in secondary effluent was studied in pilot scale at Lundåkraverket wastewater treatment plant in Landskrona, Sweden. With a chemical dose of 4 gAl3+/m3 and 1.5 g/m3 cationic polymer as active material effluent water quality with regards to total phosphorous (Tot-P), suspended solids and turbidity were 0.03, 2 mg/l and 0.5 Nephelometric Turbidity Units (NTU) in average. The effluent water quality was similar whether ozonation with an applied ozone dose of 2–9 gO3/m3 was performed prior to or after coagulation/flocculation/discfiltration. The results were corresponding to removal efficiencies for the coagulation/flocculation/discfiltration process of 94, 74 and 85% for Tot-P, suspended solids and turbidity, respectively. For organic micro-pollutants removal, it was found to be beneficial to perform coagulation/flocculation/discfiltration prior to ozonation as the ozone requirements were lowered for the dosing intervals applied. The removal was in the range of 38–98% depending on process configuration and ozone dose.
No takes yet. Share an insight, caveat, or question.
Väänänen et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: