This paper describes the measurements of excess noise and residual defects of extremely low concentrations (9cm-2) in ion-implanted p-channel MOSFET's. The activation energy and the density of the residual defects after high-temperature annealing were measured using a transient capacitance technique. The test FET's were ion-implanted with fluences of 5 × 1011to 4 × 1012using31p+,11B+, or28Si+species. A post-implant anneal was carried out in an N2or an Ar ambient for 20 min at various temperatures. For11B+-implanted MOSFET's after annealing above 1000°C, a high residual defect concentration was observed near the conduction band edge; whereas after annealing the defect density as a result of28Si+or31p+implantation was equal to that of control MOSFET's. The density-of-state data agree with the equilibrium measurements of excess (1/f) noise power. The excess noise was measured as a function of the drain current. The distribution of1/fnoise power versus potential minimum of holes in the equilibrium condition is similar to that of interface state density. In nonequilibrium operation, a reduction of excess noise was achieved owing to the presence of buried channel created by ion implant.
No takes yet. Share an insight, caveat, or question.
K.L. Wang (1978) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: