Answers are grounded in this paper and cite their sources.
This study investigates the fabrication and characterization of cone shaped fibre reinforced ultra-high-temperature ceramic matrix composites (UHTCMCs) based on ZrB 2 , using slip casting and pressure-less sintering at 2100 °C in Ar. For the sake of comparison, the same process was used for production of bulk ZrB₂-based cones. The slip casting technique effectively ensured a homogeneous fibre distribution in the sample. The addition of fibres imparted a sufficient mechanical resistance to the green bodies and led to near no shrinkage during densification, achieving a lightweight conical structure with a density of 1 g/cm 3 . Despite the high content of porosity, the cones survived two consecutive oxidation tests at 1650 °C for 1 and 3 min. Overall, slip casting proved to be a viable method for producing UHTCMCs with complex shapes and oxidation resistance.
No takes yet. Share an insight, caveat, or question.
Mor et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: