A metasurface-based slit-loaded wideband circularly polarized crossed dipole antenna

A metasurface-based low-profile crossed dipole antenna with wide circularly polarized bandwidth for 2.45 GHz ISM band wireless communications is proposed and fabricated in this article. Consisting of four slit-loaded rectangular patches, the double-sided printing crossed dipoles are fed by a pair of vacant-quarter printed rings which circularly polarized (CP) radiation could be generated. With slits loaded, by properly combining the fundamental mode of the two inverted L-shaped dipole, the slot mode and extra resonance generated by the AMC surface, a wideband circularly polarized operation can be obtained. After optimization, the final design with an overall size of 0.44λ0 × 0.44λ0 × 0.1448λ0 at 2.4 GHz had measured a 31.6% (2–2.75 GHz) impedance bandwidth and 3 dB axial ratio bandwidths of measured were 23.2% (2.1–2.65 GHz), respectively. In addition, the antenna performed a small gain variation (7.0–7.5 dBic) and a front-to-back ratio (FBR) of over 25 dB across the whole CP region.