Answers are grounded in this paper and cite their sources.
Monte Carlo (MC) simulations can be employed to predict indoor dose distributions resulting from 137 Cs ground deposition. To facilitate computational efficiency, we propose a simulation method termed “fluence boundary method (FBM).” FBM accounts for contributions from distant sources by constructing photon fluence profiles at near-field boundaries around a building, with each profile determined by the land-cover type. The proposed method was validated in this study through two analyses. First, we assessed the validity of replacing the phase-space data with the fluence boundaries by comparing the FBM results with those from the full phase-space data simulations. Second, we examined the feasibility of representing fluence boundaries by land-cover type by analyzing how uncertainty in the relaxation mass depth , defined under an exponential depth distribution as the depth at which the 137 Cs concentration decreases to 1/e of the surface value, affects indoor dose distributions. Under the tested conditions, the results obtained using the MC code PHITS show that the FBM reduced the computation time to approximately one-fourth to one-sixth of that of the phase-space data method, while reducing the MC uncertainty to approximately one-fourth to one-sixth of the original level. On a 10-cm planar grid, the FBM yielded a 95th percentile absolute error below 15% across two floor plans and central vertical sections of the indoor space. For paved surfaces, of 0.3 g/cm 2 can be adopted to accommodate the common deviations. For soil surfaces, can be determined using representative time-dependent values, and the associated deviations can be neglected.
No takes yet. Share an insight, caveat, or question.
Kobayashi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: