Answers are grounded in this paper and cite their sources.
Space gravitational wave detection missions demand ultra-stable calibration of inertial sensor capacitive sensing. Conventional dynamic methods suffer from mechanical vibration noise and bias separation difficulties, while large-displacement operation introduces pronounced nonlinearity. This work proposes a static calibration method using an image-based displacement measurement system to establish a vibration-free benchmark. A subpixel edge detection algorithm locates the Test Mass and Electrode Housing edges with a repeatability of approximately 0.05 pixels, and the Test Mass geometry is independently calibrated by a Coordinate Measuring Machine (CMM, ±2 µm, k=2) to provide SI traceability. A nonlinear calibration model incorporating higher-order Taylor terms is developed, combined with a forward/reverse connection technique for composite bias modeling. Experimental validation at x0=665 µm (x0/d0≈0.665) demonstrated a gain coefficient repeatability of 0.01658% RMSPER and a combined expanded uncertainty of U≈2.18×10−5 1/µm (k=2). Intended as a complementary ground-based technique to dynamic calibration, this method avoids dynamic excitation-induced noise while establishing complete SI traceability, offering a reliable solution for ground validation and long-term monitoring of space inertial sensors.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: