Answers are grounded in this paper and cite their sources.
In this article, full-metal ridged waveguide magic tees are designed and fabricated based on 3-D printing technology. Two kinds of prototypes with different structures and performances are proposed and compared. First, a wideband design based on double-ridged waveguide (DRWG) transmission lines was proposed, and it achieved a measured operational bandwidth of 27%. However, this component has to be split into two parts that are printed separately and then assembled together by screws because the overhang structure cannot satisfy the 3-D printing rules. To overcome this problem, a novel magic tee based on pyramidal ridged waveguide (PRWG) is proposed. In spite of a narrower bandwidth of 8.6%, this design requires a simpler fabrication method and has a lower profile. To the best of our knowledge, the PRWG prototype is the first full-metal magic tee that is fabricated as a whole part without involving any assembling or tuning and, thus, saves processing time and manual work.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: