Answers are grounded in this paper and cite their sources.
Single-phase voltage-source bridge inverters are widely used in energy storage systems (ESS) and distributed energy resources to transfer dc power to grid-side ac power. The most popular modulation strategy for controlling the ac output of bridge inverters is known as carrier-based pulsewidth modulation (PWM), which varies the duty cycle of the inverter switches at a high switching frequency to achieve a target average line-frequency output voltage or current. Regarding most carrier-based PWM techniques only enable the bridge inverters to operate under continuous conduction mode (CCM) due to the nonlinearity of discontinuous conduction mode (DCM), a pulse energy modulation (PEM) technique is proposed in this article to control single-phase bridge inverters based on energy packets, enabling the inverter to operate under both DCM and CCM and switch between them seamlessly. A single-phase bridge inverter with voltage boosting and power decoupling capabilities is examined as a case study. Small-signal analyses have been conducted for the inverter system with both L-filter and LCL-filter, and the resonant spike of LCL-filter is attenuated in PEM. Simulation and experimental results verify the feasibility of PEM on the investigated single-phase bridge inverter under both DCM and CCM.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: