Answers are grounded in this paper and cite their sources.
Measuring with a spectroscopic ellipsometer we determined the complex dielectric function of completely amorphous silicon carbide prepared by ion implantation. 860 keV Ni + ions were implanted into single crystalline 4H‐SiC to produce thick amorphized layer. Ion beam analysis was applied to assess total amorphization. For this purpose 4 He + ion beam of 3.5 MeV was selected taking the advantage that the scattering cross section of carbon at this energy at 165° detection angle is about six times larger than the Rutherford type. Atomic force microscopy was performed to characterize the roughness of the ion‐implanted surfaces. Multiple energy Ar + implantation was used to produce homogeneous amorphous layer. The Tauc‐Lorentz model was applied for the evaluation of the ellipsometric results. The implantation‐induced swelling was obtained through the measurement of the step height across the masked and implanted areas. Comparison was made among the complex dielectric functions of amorphized SiC studied by us and by different research groups. It is found that the complex dielectric functions of amorphized SiC differ considerably if different ion implantation conditions were applied. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
No takes yet. Share an insight, caveat, or question.
Lohner et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: