Answers are grounded in this paper and cite their sources.
Attempts to obtain the metallic phase of InSb by the use of a Teflon cell and a 40-centistroke silicone oil as the pressure cell and transmitting medium respectively, in a piston-cylinder apparatus failed. Work done at the University of California, Los Angeles, indicated that the metallic form of InSb could be recovered at liquid-nitrogen temperatures. Therefore, an opposed-anvil apparatus was made from hardened tool steel. The cell had a retaining ring of isomica 0.016-in. thick with an outside diameter of 1/2 in. and an inside diameter of 3/16 in. The sample cell had a silver chloride disk 0.012-in. thick. The InSb sample itself was 0.012 in. thick by 3/32 or 3/16 in. in diameter. As the transition temperature is sluggish under quasi-hydrostatic conditions, the samples were kept above the transition pressure for 3 to 4 days. Then liquid nitrogen was added to the beaker and the pressure released. This sample was superconducting at 2.1 ction in DDT-C/ 0.2 nif- K. (M.C.0.)
No takes yet. Share an insight, caveat, or question.
Geller et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: