Answers are grounded in this paper and cite their sources.
Machining significantly influences surface integrity via resulting surface roughness and induced residual stress. We explore methods to engineer surface integrity at the machining stage, thereby reducing the need for expensive post-processing to obtain the desired surface integrity. We present the results of an investigation on varying cutting tool nose geometry (standard cutting tool nose and a modified wiper nose) and application of a targeted cutting fluids when machining 2024-T351 aluminum. The cutting fluid conditions used were: flood coolant at 6 L/min., targeted minimum quantity fluid at 60 mL/hour and 300 mL/hour, and dry machining. The machining-induced residual strains near-surface and subsurface were then measured, and the resulting residual stresses were calculated. The corresponding changes in surface roughness and topography were also measured. Other influencing factors, such as variations in the cutting forces and the effect of chip formation and localized chip side-flow on surface quality, were also studied. Our results show that modifying the nose radius profile of the cutting tool geometry has a significant effect on the resulting machined surface integrity. Similarly, the use and controlled dispensing of cutting fluids plays a role in surface integrity.
No takes yet. Share an insight, caveat, or question.
Shoemaker et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: