Answers are grounded in this paper and cite their sources.
Wind tunnels play an essential role in aerodynamic research, delivering controlled airflow environments for analyzing aerodynamic forces. However, challenges such as nonlinear stability, excessive boundary-layer growth, and turbulence within the test section hinder performance optimization. Additionally, the high fabrication costs of conventional wind tunnels remain a significant constraint in developing countries. Therefore, the key objectives of this study are the design, numerical optimization, development, and validation of an affordable, smoke-visualized subsonic wind tunnel, with particular emphasis on optimizing the contraction section to enhance flow uniformity. The contraction section was redesigned using Bell and Mehta’s fifth-order polynomial equation. The optimized configuration achieved a 2% reduction in length relative to prior work, resulting in an efficient and compact design. The optimized design ensured an improved flow stabilization at the test section, reducing the wall shear stress to a minimal value of 0.0301 Pascals at a test speed of 30 m/s. Afterwards, wind tunnel performance was rigorously validated through a comparative analysis of numerical and experimental-based results calculated using Ansys Fluent and an optimized wind tunnel, respectively, for the NACA-2412 airfoil. The result showed only a deviation of around 4.2% between numerical and experimental-based lift-to-drag ratios. The wind tunnel was developed using locally sourced materials for just $180, incorporating an acrylic test section, a high-performance suction fan, and load cell sensors. The developed wind tunnel provides a practical and low-cost experimental facility suitable for aerodynamics investigations in institutions with limited resources.
No takes yet. Share an insight, caveat, or question.
Jalal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: