Answers are grounded in this paper and cite their sources.
Ethylene is the most important chemical produced by the petrochemical industry; it accounts for over 70% of the products made in the sector. Its global market value exceeds 200 billion US dollars and is steadily growing. Despite this importance, the current means of producing ethylene are not environmentally friendly: The production of ethylene by hydro-cracking contributes the largest amount of greenhouse gas emissions from the petrochemical industry. For this reason, several research efforts have been directed to finding alternatives to hydrocarbons as a sustainable source of ethylene. In the recent past, much attention has been given to the dehydration of ethanol as it is the most promising alternative. This route is, however, limited by its high energy requirement in order to match the conventional method. To lower this energy requirement, researchers have focused on developing more effective catalysts. Little to no work, however, has been done to determine the contribution of process configuration to this energy requirement. This study investigates the energy usage of different process models for the catalytic dehydration of bioethanol to ethylene using Aspen Plus V11. Three models were developed, optimized, and compared. The first model was the base case on which other models were compared, the second model included a recycle stream, and the last model involved the compression of liquid-phase ethanol rather than gaseous-phase ethylene. Due to lack of generalized kinetic data, the RGibbs reactor was used for the simulation. Sensitivity analyses were used to optimize the models. The base case operated at 162°C and 1 atm, the model with a recycle stream at 125°C and 1 atm, and the liquid-phase ethanol compression model at 330°C and 55 atm. Results show that the model with the recycle stream achieved the lowest energy consumption (1910 kW) but also yielded the least amount of ethylene (5230 kg/hr). The base case gave the highest ethylene yield (5649 kg/hr). While innovative, the liquid compression model consumed the highest amount of energy (2456.25 kW) due to high operating conditions. The findings in this work shed light on the importance of process modeling and optimization in enhancing the sustainability and economic viability of bioethanol to ethylene production.
No takes yet. Share an insight, caveat, or question.
Enock et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: