Answers are grounded in this paper and cite their sources.
Hexavalent chromium Cr(VI) is a highly toxic and mobile contaminant commonly detected in industrial effluents and groundwater, requiring efficient and scalable treatment strategies. In this study, a commercial unmodified biochar (UB) and an iron-modified biochar (IMB) were evaluated for Cr(VI) removal from aqueous solutions. Iron modification via FeCl3 impregnation and alkaline precipitation (pH 9) increased surface iron content from 0.2% to 3.3%, based on Energy Dispersive X-ray (EDX) analysis and extractable Fe from 0.009% to 0.108% (FerroVer). X-ray Diffraction (XRD) analysis suggested the presence of iron-containing phases and Fourier Transform Infrared (FTIR) analysis indicated the appearance of an Fe-O band at 564 cm−1. BET analysis showed a slight decrease in surface area from 359 to 317 m2 g−1, consistent with partial pore blockage following iron modification. Batch adsorption experiments (pH 2–10; initial Cr(VI) concentration 5–600 mg L−1; adsorbent dosage 2 g L−1) revealed a maximum Langmuir adsorption capacity of 158 mg g−1 for IMB, nearly double that of UB (82 mg g−1), with optimal performance at pH 4–6. At equilibrium, removal efficiencies of ~60% and ~80% were obtained for UB and IMB, respectively (C0 = 100 mg L−1; adsorbent dose = 2 g L−1). Kinetics followed a pseudo-second-order model, with IMB reaching equilibrium within 8 h compared to 50 h for UB. Isotherm analysis is consistent with Langmuir behavior for UB and Freundlich behavior for IMB. The improved adsorption performance of IMB is likely associated with the increased iron content introduced during modification, demonstrating its potential as an effective adsorbent for Cr(VI) removal from water.
No takes yet. Share an insight, caveat, or question.
Rajapakshe et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: