Answers are grounded in this paper and cite their sources.
Aragonite and vaterite were comparatively evaluated as partial Portland cement replacements (10 and 20 wt%) to assess their effects on hydration, mechanical performance, and structure across multiple length scales. Neat cement pastes with or without inert quartz sand served as reference systems. A multi-scale approach combining isothermal calorimetry, X-ray powder diffraction, mercury intrusion porosimetry, small-angle neutron scattering (SANS), compressive strength, and Ca 2+ adsorption measurements was employed. Aragonite was associated with a higher overall hydration degree and amorphous phase content, whereas vaterite promoted the formation of crystalline hydrates. At 10 wt% substitution, both polymorphs produced a coarser microstructure and lower compressive strength, with a more pronounced effect for vaterite. At 20 wt%, the aragonite-containing paste exhibited finer capillary pores and a further reduction in strength despite similar total porosity. In contrast, additional coarsening in the vaterite-containing paste did not further reduce strength. Specific surface area-normalized calorimetry showed higher heat release for the vaterite-containing paste, indicating a stronger nucleation contribution, consistent with the slightly higher affinity of vaterite for Ca 2+ . SANS analysis showed an increase in the volume-fractal dimension for pastes incorporating vaterite, indicating a more complex nanoscale organization of the C–S–H phase. In contrast, the aragonite-containing systems exhibited a decrease in surface-fractal dimension with increasing substitution level, reflecting the predominant influence of aragonite on surface-driven nucleation.
No takes yet. Share an insight, caveat, or question.
Sotiriadis et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: