Answers are grounded in this paper and cite their sources.
The momentum-transfer performance of a plasma actuator was investigated experimentally for the effects of ambient-gas pressure, ambient-gas species, and electrode configuration. For measurement of the momentum-transfer performance, the force exerted by the actuator, in addition to the induced velocity, was measured; the consistency between both measurement methods was demonstrated. Results showed that the ambient-gas pressure under which a plasma actuator operates has a considerable effect on the momentum-transfer performance. In fact, the performance does not decrease in a linear manner with decreasing ambient-gas pressure; rather, it initially increases and then decreases. The chemical species of the ambient gas also has a considerable effect on the momentum-transfer performance. The momentum transfer in air is greater than that in nitrogen gas at pressures of less than 1 atm, which suggests a considerable contribution of oxygen molecules in the air. The momentum-transfer performance in carbon dioxide gas is slightly greater than that in nitrogen gas for pressures of less than 1 atm, although they are comparable at 1-atm pressure. Furthermore, the electrode configuration was found to strongly affect the momentum-transfer performance of the plasma actuator. In particular, a mesh-type electrode can improve the performance markedly, compared with the performance of a tape electrode with similar thickness, in an ambient-gas pressure of 1 atm. However, the performance difference attributable to the electrode configuration is greatly reduced with a decrease in the ambient-gas pressure; for example, it almost disappears at pressures of less than approximately 50 kPa.
No takes yet. Share an insight, caveat, or question.
Abe et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: