Answers are grounded in this paper and cite their sources.
Experimental study demonstrates that pulsed blowing prevents inlet separation in short nacelles, indicating improved aerodynamic efficiency with reduced momentum.
Innovative short-inlet nacelle designs and disruptive technologies are essential for minimizing the drag and weight penalties of high-bypass-ratio turbofan engines. Active flow control (AFC) can mitigate inlet separation under off-design conditions by using local air injection at the inlet lip. This work investigates wind tunnel testing of continuous and pulsed blowing on a generic short-inlet UHBR nacelle at high angles of incidence (AoIs). The model is designed as a flow-through nacelle and is tested at a free stream Mach number of 0.15. The Reynolds number associated with the nacelle length is 2.4 × 10⁶ 2.4 × 10 6 . Static pressure tabs on the model surface and a traversable total pressure rake serve to evaluate the performance of AFC. Both continuous and pulsed blowing could prevent inlet separation for AoIs of 18∘ 18 ∘ and 22∘ 22 ∘ , reducing spatial total pressure non-uniformity by up to 80%. Here, the AFC performance showed strong sensitivity to the jet velocity. A comparison of required momentum revealed that pulsed blowing consumes 20% less momentum input than continuous blowing for the same improvement level. For an AoI of 26∘ 26 ∘ , only continuous blowing at maximum momentum input could effectively mitigate inlet separation. This experimental study confirms the potential of AFC to improve inlet flow under off-design conditions.
No takes yet. Share an insight, caveat, or question.
Hayböck et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: