Answers are grounded in this paper and cite their sources.
The counting losses due to the finite recovery time of Geiger-M\"uller counter circuits and recorders are investigated. A description and critique of several experimental methods is given. The parallel method reported here gives the most accurate results. By this method the counting losses in a system consisting of a Geiger-M\"uller counter coupled by means of a Neher-Harper circuit to a scale-of-one recorder were determined. The method compares the counts registered by the scale-of-one against those registered by a vacuum tube scale-of-128 in parallel with it. The resolution times of both the scale-of-one and the G-M, Neher-Harper combination are thus found. The theoretical equations of Ruark and Brammer and Alaoglu and Smith are verified. The limitations and applicability of the Schiff-Volz formulation are also determined. Departures from the Ruark-Brammer formula for the Neher-Harper circuit are found at high counting rates. A corrected formula is derived. The speed of the Neher-Harper type of extinguishing circuit, determined in these experiments, is compared against the maximum counting speed possible with G-M counters. It is found that such circuits already approach the speed of the G-M tube itself. Existing vacuum tube scaling circuits and frequency meters are shown to be already faster than the G-M tube itself. The methods for correcting recorders and counter circuits for counting losses are given. These losses amount to about 20 percent for a Cenco recorder and one percent for most G-M counters at input rates of 1000 counts per minute. The losses increase rapidly with the input counting rate.
No takes yet. Share an insight, caveat, or question.
Lifschutz et al. (1938) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: