Answers are grounded in this paper and cite their sources.
The Writers wish to present some additional data obtained independently and with different techniques that confirm the results published in the Paper. For these tests, the speswhite kaolin clay was prepared as a slurry with a water content of 133% and was then consolidated onedimensionally under an axial stress of 100 kPa in a 203 mm dia. tube. A stress of 100 kPa was selected as the consolidation pressure, resulting in a sample with relatively high void ratio, yet stiff enough to be trimmed without much sample disturbance. Four cylindrical samples of 71 mm dia. were obtained from the compressed material. Two of the samples had axes in the vertical direction and two in the horizontal direction. The samples were tested in a flexible wall permeameter using the flow pump technique (Pane, Croce, ZnidarEiC, Ko, Olsen & Schiffman, 1983; Olsen, Nichols & Rice, 1985) to measure permeability.
No takes yet. Share an insight, caveat, or question.
Al‐Tabbaa et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: