Answers are grounded in this paper and cite their sources.
The electric strength of n -hexane for steady fields (direct strength) is found to increase from 0.7 MV cm -1 to 1.3 MV cm -1 and to become insensitive to electrode material as the amount of dissolved oxygen is increased to an equilibrium partial pressure of 100 mmHg in the vapour phase above the liquid. Greater amounts do not increase the strength. Nitrogen, hydrogen and carbon dioxide have no effect even when large amounts are dissolved, except that repeated discharges when carbon dioxide is present cause the strength to rise, probably because of the release of oxygen. Unless the liquid has been pre-stressed with direct voltage of opposite polarity, the strength with 1.5 μsec pulses is not affected by gas dissolved. Immediately after pre-stressing, however, the strength with pulses may be as great as 2.5 MV cm -1 . Dust particles of the order of 1 μm in size are always observed in the liquid and under direct stress pass to and fro between the electrodes. This activity is reduced by the addition of oxygen. With high oxygen concentrations the visible particles are sometimes observed to be expelled from the gap and strengths up to 2 MV cm -1 are then recorded. Oxygen, being electronegative, is likely to cause the formation of negative ions. It is suggested that these ions can inhibit the breakdown and lead to higher strengths with direct voltage and also with pulses if the liquid has been previously stressed with direct voltage of opposite polarity.
No takes yet. Share an insight, caveat, or question.
Sletten et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: