Answers are grounded in this paper and cite their sources.
The effects of organic modifier and processing method on morphology and mechanical properties of epoxy‐clay nanocomposites were investigated. In this study, the preparation of nanocomposites by exfoliation‐adsorption method involved an ultrasonic mixing procedure, and mechanical blending was used for in situ intercalative polymerization. The microstructure study revealed that the organoclay, which was ultrasonically mixed with the epoxy, partially exfoliated and intercalated. In contrast, organoclay remained in phase‐separated and flocculated state after the mechanical blending process. Tensile stiffness increased significantly for the nanocomposite prepared by ultrasonic dispersion method through realizing the reinforcing potential of exfoliated silicate layers. Nanocomposites with exfoliated and intercalated nanoclay morphology were ineffective in enhancing the fracture toughness whereas nanocomposites with phase‐separated and flocculated morphology have improved crack resistance predominantly by crack deflecting and pinning mechanisms.
No takes yet. Share an insight, caveat, or question.
Mertiny et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: