Answers are grounded in this paper and cite their sources.
Stabilization treatment is an effective way to improve the long-term corrosion resistance of low-Mg content (≤5wt.%) Al alloys due to the formation of discontinuous grain boundary β-Al 3 Mg 2 precipitates. Increasing the Mg content can dramatically improve the strength of the alloy by Mg atom solid solution. However, achieving long-term corrosion resistance of such high-Mg (> 6 wt.%) aluminum alloys still poses a serious challenge. In this study to solve the trade-off between strength and long-term corrosion resistance, a synergistic approach combining Zn microalloying with optimized stabilization treatment parameters is employed to improve the comprehensive performance of Al-7wt.%Mg alloy. The Zn-containing alloy demonstrates enhanced spheroidization of GBPs and reduced Mg content in the matrix, both contributing to superior sensitization annealing performance. Theoretical modeling incorporating grain boundary diffusion mechanism and phase-interface interactions confirms that Zn-containing alloys exhibit a significant reduction in grain boundary phase elongation rate during accelerated sensitization compared with Zn-free counterparts. This research provides critical guidance for developing corrosion-resistant high-Mg aluminum alloys in marine engineering applications.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: