Answers are grounded in this paper and cite their sources.
It is known that grain refinement improves balance of strength and ductility of materials. As a technique to obtain fine-grained microstructure, dynamic recrystallization can be used in industrial processes. The authors reported that fine grains appear beneath the surface of Al-Mg alloy sheet by high-speed rolling. In this study, rolling conditions to form fine recrystallized microstructure were investigated. AA5052 alloy sheets were rolled at 500 m/min, 1000 m/min or 2000 m/min with thickness reduction of 30%, 50% or 70% at 473 K, 523 K, 573 K or 623 K. After the rolling, the sheets were water-quenched immediately. It is found that the critical strain for dynamic recrystallization is very large. For example, when the sheets are rolled at 1000 m/min and 623 K, thickness reduction greater than 76% is required for dynamic recrystallization.
No takes yet. Share an insight, caveat, or question.
Kazaoka et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: