Answers are grounded in this paper and cite their sources.
Experimental study demonstrates polymer-coated silica aerogels reduce drilling fluid thermal conductivity and filtration loss, highlighting an approach to limit wellbore instability.
In the process of ultra-deep oil and gas drilling , the heat transfer between high-temperature formation and cold drilling fluids will have a negative impact on the wellbore stability. This study prepared polymer-coated SiO 2 aerogel (PC@SiO 2 ) via suspension polymerization to attenuate the heat transfer caused by non-isothermal temperature. The PC@SiO 2 was characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetry analysis (TGA), particle size distribution , and transmission electron microscopy (TEM) tests. The PC@SiO 2 is the micron-sized spherical particle (1.2–37.6 μm) with an initial thermal decomposition temperature of 270 °C. The impact of PC@SiO 2 on the performance of drilling fluid was evaluated by rheology, filtration loss, and sand bed plugging tests. The results demonstrated that PC@SiO 2 had good compatibility with drilling fluids and could enhance the performance of drilling fluids at high temperatures. After aging at 210 °C for 16 h, the high-temperature and high-pressure filtration loss (FL HTHP ) of Na-bt base fluid containing 2 wt% PC@SiO 2 was reduced by 47.3%. The thermal conductivity and infrared thermography tests evaluated the thermal insulation performance of PC@SiO 2 . The PC@SiO 2 displayed good thermal insulation properties . The 2 wt% PC@SiO 2 could reduce the thermal conductivity of the 4% Na-bt base fluid by 9.2%. The thermal conductivity of the self-made mud cake containing 2 wt% PC@SiO 2 was decreased by 33.8% after aging at 210 °C for 16 h. The surface temperature of the self-made mud cake was 120.2 °C (untreated: 151.8 °C) after 50 s on a heating table. The scanning electron microscopy (SEM) of the surface of the mud cake revealed the participation of PC@SiO 2 in the formation of the mud cake. In conclusion, reducing the thermal conductivity of drilling fluids and mud cake was regarded as two crucial thermal insulation mechanisms for PC@SiO 2 . This research provided a new direction for attenuating the heat transfer between the drilling fluid and the formation.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: