Answers are grounded in this paper and cite their sources.
Alkali-activated binder-based composites offer a sustainable alternative to cement-based systems, giving a conservational approach. This research incorporated rice-husk ash (RHA) and waste foundry sand (WFS) into ground-granulated-blast-furnace slag (GGBS)-based alkali-activated high-end pavement-quality concretes, optimising with air-curing for expressways, freeways and runway applications. This study promotes sustainable construction by efficiently utilising agro-industrial wastes (i.e., RHA, GGBS and WFS) promoting a global initiative to decrease environmental impact and to adopt eco-friendly pavement construction methods. This study systematically substitutes the primary binder-GGBS with RHA at 5% intervals. The binder was alkali-activated using measured amounts of liquid sodium silicate and sodium hydroxide flakes prepared at an activator modulus (Ms) of 1.25 by maintaining the sodium oxide dosage of 4.0% with respect to the total binder. In particular, 15% RHA (with 85% GGBS) and 20% WFS (with 80% river sand) satisfy mechanical design standards for workability and strength. A comprehensive life cycle analysis using extensive literature support assesses the environmental impact and sustainability of developed pavement quality composites, showing over 70% less energy use than Portland cement-based pavement mixes. Therefore, employing RHA and WFS in air-cured alkali-activated composite manufacture shows that agro-industrial waste components may be used to make sustainable, cost-effective pavement construction. This study effectively advocates for a shift towards environmentally responsible pavement construction, contributing to a greener, more sustainable future in concrete pavement engineering.
No takes yet. Share an insight, caveat, or question.
Sheshadri et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: