Answers are grounded in this paper and cite their sources.
Wafer-level isotropic etching of silicon with XeF2gas has been investigated for microelectromechanical-system (MEMS) fabrication. Because of the large exposed silicon area in the wafer-level process, XeF2gas diffusion in the wafer-level process is different from the chip-level process. The silicon etch rate for the wafer-level XeF2process is much smaller than chip-level XeF2etching. Additionally, the silicon etch rate drops off as the etching time increased. The aperture size effect is apparent in the wafer-level XeF2processing. However, for etching windows with a large size, the aperture size effect will be minimized. Both vertical and lateral aperture size effects depend on the number of etch cycle. Although slight anisotropy is also observed, wafer-level XeF2etching shows a better isotropy than the chip-level process. Compared with the chip-level process, wafer-level XeF2etching shows a large etch rate for SiO2. The etch selectivity between silicon and SiO2is lower than 1000:1. Based on the characteristics of XeF2etching, the layout design rule for the MEMS device with XeF2releasing is developed and demonstrated.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: