Answers are grounded in this paper and cite their sources.
In the present research work, films of pure PMMA, pure PVDF-HFP, PMMA : PVDF-HFP : NaClO4 polymer blend electrolyte, and different concentrations of TiO2 nanoparticles doped PMMA : PVDF-HFP : NaClO4 polymer electrolytes have been prepared with the help of solution casting technique. The research work attempted to fabricate dye sensitized Solar (DSS) cell using best TiO2 nanoparticles doped thin film. Properties like structural, morphological, optical and conductivity of all the prepared thin films have been investigated through different characterization techniques such as XRD, SEM, FTIR, and AC conductivity respectively. From the results of XRD and SEM of these films, established dominant amorphous nature at 12 wt % of TiO2 nanoparticles doped PMMA : PVDF-HFP : NaClO4 thin film. The interaction/complexation of TiO2 nanoparticles with polymers and salt is observed from IR spectra of vibrational bands. Ionic conductivity measurements of the films have been carried out using AC impedance spectro-scopy, and the optimum conductivity value was found at 1.12 × 10–3 S/cm. Finally, dye sensitized Solar (DSS) cell has been constructed using the best polymer electrolyte i.e. 12 wt % of TiO2 nanocomposition PMMA : PVDF-HFP : NaClO4, further fill factor and efficiency are calculated and reported as 0.853 and 8.29% respectively. The features of the developed DSS cell have been shown to be stable and exhibit remarkable potential in solar cells.
No takes yet. Share an insight, caveat, or question.
Mettu et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: