Answers are grounded in this paper and cite their sources.
Thermoelectric power features many favourable characteristics and has been widely utilised as heat harvesters. Bismuth telluride (Bi 2 Te 3 )-based materials are the best thermoelectric materials working at low temperatures currently. In order to fabricate a Bi 2 Te 3 -based thermoelectric module for high output power, p-type Bi 0·5 Sb 1·5 Te 3 and n-type Bi 2 Te 2·7 Se 0·3 thermoelectric bulks were prepared by zone melting technique. The tested figure-of-merits of the p- and n-type materials reached 1·1 at 300 K and 1·09 at 325 K, respectively. Then a Bi 2 Te 3 -based module was fabricated of 127 pairs of p-n thermoelements whose thicknesses and widths are 1·0 mm and 1·4 mm, respectively. At last the output power of the module was measured in the built experimental system. The maximum power up to 8·2 W was achieved when the temperature difference of the heat source and the heat sink was 178 K, and the corresponding area-specific power was 0·52 Wcm −2 .
No takes yet. Share an insight, caveat, or question.
Cheng et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: