Answers are grounded in this paper and cite their sources.
Aqueous dispersions of colloidal silica (CS) are commonly employed in high-alumina refractory castables to prepare in situ mullite, behaving simultaneously as a liquid medium, binder, and SiO2-source. Despite such technological interest, CS was not explored as a uniaxial pressing additive to replace organic binders and promote earlier strengthening during sintering. This study mixed alumina particles with varying amounts of CS to compare structures composed of the same raw materials, shaped by different processing techniques. Such compositions were pressed as bars or cast into cylinders, and their microstructure and physical properties evolution were assessed during sintering (700-1500ºC). Cast samples developed a homogeneous microstructure comprised of alumina particles surrounded by a gelled CS phase; in contrast, the pressed samples generated SiO2-rich spherical clusters, originating from the original CS droplets, surrounded by alumina. Such a heterogeneous microstructure persisted during sintering, when the silica nanoparticles crystallized before forming mullite. Directly cast samples developed a granular microstructure of alumina-mullite, with traces of cristobalite. In pressed samples, regions with higher SiO2 concentration developed acicular mullite crystals, imbibed in a matrix of alumina and cristobalite. Increasing the CS content in both cases enhanced porosity and decreased strength after sintering at temperatures above 1100 °C.
No takes yet. Share an insight, caveat, or question.
Andreto et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: