Applications of DSP in DC Drives RV Machines and AC Drives SPIM Machines

This is the authors' abstract. We don't add key points for this paper.

The specific requirements for data acquisition, processing, and control in the studied electrical drive for Digital signal processing (DSP), the cornerstone of numerous applications that power electronics and the development of high-performance drives is one of them, for example, drives. The designed controller for dc and ac drives using DSP TMS320F28335. The controlled with current and speed controller is designed and implemented using MATLAB/SIMULINK program, that is the current and speed response is verified through simulations and experiments. The paper is proposed solution is developed for the case of two part types, that first part of study to the DC drives for roof ventilator (RV) is a diameter about 75 cm, the RV will be direct coupling into dc machines, a new power conversion on machinery with roof ventilator (RV) dc machines at maximum rated dc voltage 24V, 117W. The DC motor operation mode it can control variable speed on rang 0-800 rpm. And the second part, proposed to study to the AC drives for the Single-phase induction motor (SPIM) is transformed from a non-linear to linear control plant, at maximum rated 3hp (2.2kW) 220V 50Hz. The indirect rotor field-oriented control (IRFOC). The SPIM operation mode it can control variable speed on rang 0-1000 rpm. In this paper that is is a review of DSP applications that provides a guideline to further analyses and improve power conversion in electrical system pertinent to DC and AC drives technique.