Answers are grounded in this paper and cite their sources.
The influence of stoichiometry, i.e., Ba/Ti ratio, on the microstructure and positive temperature coefficient of resistivity (PTCR) characteristics of BaTiO 3 was investigated. Fine‐grain microstructures are obtained for Ba‐rich, stoichiometric, low‐temperature‐sintered, Ti‐rich materials. The room‐temperature resistivities ( ρRT ) of the fine‐grain Ti‐rich samples are large (>10 8 Ω·cm). Excess Ba 2+ ions can decrease the ρRT , by more than 2 orders of magnitude, because of the compensation of barium vacancies near the grain‐boundary regions. Rapid cooling after sintering can also decrease ρRT (⋍100×) and is ascribed to the suppression of reoxidation. Large‐grain microstructures and low ρRT , on the other hand, are generally observed for Ti‐rich and Al 2 O 3 ‐SiO 2 ‐TiO 2 ‐added samples after sintering at a temperature higher than the corresponding eutectic point.
No takes yet. Share an insight, caveat, or question.
Lin et al. (1990) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: