Answers are grounded in this paper and cite their sources.
he emulsion polymerization of methyl methacrylate (MMA) was carried out in a waterbath controlled at 70±0.3°C, using potassium persulfate (KPS) as an initiator and Rapisol (sodium dialkyl sulfosuccinate) as an anionic emulsifier. The effect of the following monomer-addition techniques on the time-temperature curve was examined:(A) initial addition of monomer, (B) portionwise addition of monomer, and (C) dropwise addition of monomer.The time-temperature curve in the case of (A) was found to have a plateau region and a peak (similar to that for vinyl acetate discribed in the previous paper) even though reflux was not observed throughout the polymerization process.ΔT=Tmax (temperature in the flask at the peak)-Te (temperature of the reaction system in equilibrium with the water-bath at 70°C) increased with increasing concentration of KPS and amount of monomer, but it was not affected by the concentration of Rapisol. The time-temperature curve in the case of (C) varied with the rate of monomer-dripping.From the data of polymerization rate per particle, changes of molecular weight of polymer and of monomer-polymer composition throughout the polymerization process, it was concluded that occurence of the peak is due to Trommsdorff effect. Considering Trommsdorff effect, ΔT is expressed as_??_where V and N are the total volume of polymer particle at the peak in the time-temperature curve and the number of polymer particle in the entire system, respectively.
No takes yet. Share an insight, caveat, or question.
Fujii et al. (1969) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: