Answers are grounded in this paper and cite their sources.
The microstructure develops very rapidly in biaxially stretched PET above T g and exhibits significant variability under supposedly identical processing conditions. This makes a deterministic prediction of the induced properties difficult and motivates the use of a probabilistic description. In this work, the microstructure of free-blown PET bottles after elastic recovery is investigated using DSC, density measurements and SAXS. The comparison between DSC- and density-based crystallinity estimates is first analyzed under reference-value uncertainty, rather than by imposing a unique crystallinity value. The results show that the apparent discrepancy between the two methods is strongly controlled by the crystalline density and by the enthalpy of fusion of fully crystalline PET. These reference quantities are therefore treated as uncertain physical inputs. The SAXS data are analyzed using both the lamellar stack fitting method and the correlation function γ(z). The γ(z) approach provides lamellar dimensions that are more consistent with the measured crystallinity range and with the observed mechanical anisotropy. A through-thickness microstructural description based on γ(z) is then introduced and used in a double homogenization analysis to predict the induced orthotropic elastic moduli. Particular attention is paid to the amorphous transverse modulus E 2a , whose partial indetermination is explicitly included in the uncertainty propagation. The results confirm the major role of the oriented or constrained amorphous phase in the final elastic anisotropy of free-blown PET bottles.
No takes yet. Share an insight, caveat, or question.
Chevalier et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: